Some harnesses are designed to serve more than one purpose. Check the manufacturer’s label for the harness’s


  • Group A—Fall arresting
  • Group D—Controlled descent
  • Group E—Confined entry (raising and lowering)
  • Group L—Ladder climbing
  • Group P—Work positioning

Note: Only a full body harness that meets CSA Standards Z259.10 is acceptable to WorkSafe.

  • Adjust all hardware and straps so the harness fits snugly but still lets you move freely. Tuck in all loose straps so they don’t snag or cause you to trip.
  • Hook onto the harness D-ring (marked “A” on each shoulder strap, as shown in the above-right diagram)designed to arrest falls.

Download file for free:

Similar Posts

Leave a Reply